Santos 1400 Palisade gate

Palisade round top entrance gate 1400mm high with a heavy 90mm x 70mm morticed frame, supplied as a pair with galvanised or black hardware. Traditionally fabricated with class IV pressure treated northern red pine, with a smooth planed finish, mortice and tenon joints including hardwood dowels and supported by robust bracing. Class IV pressure treated timber is suitable for water and ground contact with a high resistance against insect attack and fungal decay. We recommend for added protection using a modern microporous UV oil to treat all our timber gates, the oil essentially fills the microscopic holes as it is absorbed into the wood and helps protect from deterioration & movement in the wood.

• Fabricated in pressure treated class IV pine.
• 90mm wide x 70mm deep mortice & tenon heavy frame.
• 120mm x 21mm round top palisade.
• Available in 3.00m ( 2 x 1.50m gates) or 3.50m (2 x 1.75m gates)

Supplied with hardware attached: Heavy duty 450mm adjustable hinge set with 3.00m gates and heavy duty 600mm adjustable hinge set with 3.50m gates, 600mm drop bolt, 150mm Ring latch, choice of a galvanised or black. Hardware supplied in galvanised or epoxy black. An extra drop bolt can be purchased if two bolts are required, usually to hold the gate in an open position, with two bolts we would suggest the long concrete in keep as an extra. Cabin hooks can also be used. A choice of hasp and staple is also available to padlock the gate.

Please be aware that this is a heavy gate. When open, it should be held in place with two bolts, cabin hooks, or ground stays.

If you need advice, contact us. We will be happy to answer any questions you may have.

Please allow up to 6 weeks for delivery or collection.